Di4 2850W Manual De Instrucciones página 18

VERTICAL STEAM IRONING
This feature allows you to smooth out creases in garments or drapery in a similar manner to a gar-
ment steamer. The high steam pressure of the Steam Station can provide bursts of steam while hold-
ing the iron vertically. For best results, utilise on delicate or light fabrics. To produce the maximum
amount of steam, set the steam setting to MAX. Only direct steam at hanging garments in a safe area
and ensure you always refer to garment manufacturer recommendations.
WARNING: Do NOT direct the steam onto a garment that is being worn or at any person.
REFILLING THE WATER TANK
When running low on water, the Steam Station will stop emitting steam even if you press the steam
trigger, and the low water indicator light will flash red. You do not have to switch off the Steam Station
to refill the water tank. Simply remove the water tank to refill, or use a cup or bottle to pour water into
the easy-fill water tank inlet.
MANITENCE AND CLEANING
Cleaning
Turn off the Steam Station and unplug at the power outlet.
Remove the water tank, empty and rinse.
Regularly clean the ceramic soleplate with a damp, non-metallic washing pad.
Wipe the exterior of the Steam Station with a soft cloth.
Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station.
Descaling operation
NOTE: Ensure the Steam Station has cooled completely before descaling operation.
To extend the effective operating life of the Steam Station and avoid scale particle build up, it is rec-
ommended to rinse the chamber out once a month or after every 10 uses.
1. Turn off the Steam Station and unplug at the power outlet.
2. Take off the cleaning bolt by the Slotted screwdriver, put a container under the cleaning opening.
3. Plug in, set the steam control knob to Max. position, press steam button 2-3 minutes for cleaning.
4. Turn off the Steam Station and wait for it cool.
5. Screw the plug.
NOTE: There is hot water and steam eject from cleaning bolt, carefully scalds
18