Chain Brake - Stihl MS 362 C-MQ Manual De Instrucciones

Chain Brake

The chain brake system on your saw
has two functions:
Standard STIHL Quickstop chain
N
brake and
STIHL Quickstop Plus chain brake
N
system
The standard STIHL Quickstop chain
brake utilizes the front hand guard as the
activating mechanism and is designed to
stop the chain within fractions of a
second. The STIHL Quickstop Plus
chain brake system, on the other hand,
is designed to stop chain rotation within
a second of the operator fully releasing
the rear handle.
To reduce the risk of personal injury or
property damage during cutting,
observe the characteristics that make
this saw different from saws not
equipped with a rear-handle-activated
STIHL Quickstop Plus chain brake
system. Before operating the chain saw
for the first time, make sure you are
familiar with how the STIHL Quickstop
Plus chain brake system works.
MS 362 C-MQ
STIHL Quickstop Plus chain brake
system
Activating
When you fully release the rear
N
handle, including the throttle trigger
and throttle trigger lockout.
Disengaging
Press down the throttle trigger
N
lockout. This releases the clutch
drum and allows the chain to rotate.
Standard STIHL Quickstop chain brake
Activating
When the hand guard is pushed
N
toward the bar nose by the left hand
or by inertia in certain kickback
situations.
The chain is brought to a standstill and
locked in position.
Disengaging
Pull the hand guard toward the front
N
handle.
NOTICE
Always disengage chain brake before
accelerating engine and before starting
cutting work. The only exception to this
rule is when you check operation of the
chain brake.
English
33