Ryobi TS1144 Manual Del Operador página 19

MITER
FENCE
SQUARE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
SOCKET HEAD
SCREW(S)
FENCE SCREW
SLIDING
PARTIAL FENCE
 Using the blade wrench, loosen the socket head screws
that secure the miter fence to the miter table.
 Rotate the miter fence left or right until the saw blade is
parallel with the square.
 Retighten the screws securely and recheck the blade-to-
fence alignment.
Your saw has several scale indicators. After squaring adjust-
ments have been made, it may be necessary to loosen the
indicator screws and reset them to zero. See figures 20 - 21.
ASSEMBLY
BLADE
MITER
TABLE
Fig. 18
MITER
FENCE
Fig. 19
BEVEL
SCALE
SCALE
INDICATOR
SCALE
INDICATOR
19 - English
INDICATOR
SCREW
Fig. 20
INDICATOR
SCREW
MITER
SCALE
Fig. 21