Using The Controls - Maytag MD-2 Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Controls - Auto Dry Models
STEP
1
Select Temperature
In order to select the correct temperature, turn the
Temperature control to one of four choices; Regular,
Medium, Delicate or Air Fluff.
DRYER TEMPS
Sturdy cottons or labels marked
Regular
Tumble Dry.
Medium
For wrinkle-free/permanent press
synthetics and lightweight cottons
labeled Tumble Dry Medium.
Delicate
For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Items which need freshening.
Air Fluff
Load tumbles with room
temperature air. Use the Time
Dry/Air Fluff cycle.
STEP
2
Select Options
End of Cycle Signal
When the cycle is complete, a signal will sound. On
select models, the End of Cycle Signal can be turned
down or Off.
Remove load immediately to reduce wrinkling.
3
LOAD TYPE
Delicate
Air Fluff
STEP
3
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry cycle, the control dial
should point between More Dry and Less Dry for most
loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the clothes
are cooled for approximately 10 minutes to reduce
wrinkling.
Auto Dry Permanent Press
The Auto Dry Permanent Press cycle is designed to dry
wrinkle-free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. At the end of
the cycle, the clothes are cooled for approximately 25
minutes to reduce wrinkling.
Temperature
Medium
Regular
Heavy Duty / SuperSize Capacity / Quiet Series 200 /

Publicidad

Tabla de contenido
loading

Tabla de contenido