BH FITNESS YC200 Instrucciones De Montaje Y Utilización página 17

1. ASSEMBLY INSTRUCTIONS.-
Take the unit out of its box and make
sure that all of the pieces are there:
The assistance of a second person
is recommended when assembling
this unit Fig.1.
(1) Monitor.
(7L) Top focus bar, left.
(7R) Top focus bar, right.
(13L) Bottom focus bar, left.
(13R) Bottom focus bar, right.
(76) Main post.
(68) Bottom post cover.
(19L) Pedal left foot.
(19R) Pedal right foot.
(25L) Left footrest.
(25R) Right footrest.
(53) Rear stabiliser
adjustable feet.
(51) Main body.
(67) Front stabiliser bar with wheels.
(89) Handlebar tube.
YC202:
(12L) Focus bar spindle covers (L).
(12R) Focus bar spindle covers (R).
(18L) Bottom trim covers, left and
right. (L) for the knuckle joints on the
focus bars.
(18R) Bottom trim covers, left and right
(R) for the knuckle joints on the focus
bars.
(33) Bottom cover
(82) Bottom Post cover
(104) Adapter
Fig.2 - . NUTS & BOLTS
(2) Screws
D
(3) Allen screw M8x20
(4) Washer D8XD19X1,5t.
(9) Washer D8XD36X3t.
(10) Allen screw M8x20.
(11) Spring washer D8.
(15) Nylon nut M10.
(16) Washer D10XD19X2t.
(17) Screw M10x78.
(20) Screw M6x50
(23) Washer D8XD24X2t.
(24) Screw
(26) Washer D6XD14X2t.
(27) Spring washer D6
(28) Knob M6
(34) Screw
(52) Screw M8x70.
(55) Nut
(81) Allen screw M5x12.
(94) Washer D8x19x1,5t
(95) Screw
(96) Screw M8x35 R
(97) Screw
Allen wrenches
bar with
Mixed Key.
2. FITTING THE STABILISER
BARS.-
Bring the front stabiliser bar with
wheels (67) to the main body (51)
positioning the wheels at the front of
the unit, Fig.3, insert screws (52), fit
the corrugated washers (4) and the
cap nut (55). Use the Allen key to
tighten securely.
Take the rear stabiliser (53) bar with
adjustable feet, Fig.4, insert the bolts
(52); fit the corrugated washers (4)
and the cap nut (55) and tighten
securely.
3. FITTING THE BOTTOM
POST COVER.-
Take the main post (76) and insert the
bottom post cover (68) in the direction
of the arrow, Fig.5.
17
D
D
D
D >