Operation - Stenner Pumps S FIXED SERIE Manual De Instalación Y Mantenimiento

OPERATION

S FIXED SERIES – S3F & S4F Models
The fixed speed models are not adjustable and run at 100% speed when power is applied
to the pump.
RUN ST NDBY
F ULT
LED Indicator Lights
RUN/FAULT
RUN Solid green When the pump is running and not in drive fault.
FAULT Blinking red if pump has a drive fault error.
To clear: Disconnect, then reconnect power, if FAULT is still present
contact factory for evaluation.
STANDBY Solid red Pump received a contact closure on the standby inputs.
To clear: Automatically clears when pump no longer receives a contact
closure on the standby inputs.
LEAK Blinking red When a leak is detected.
To clear: Clears when the leak detect components are free of chemical or
residue and power to the pump is disconnected, then reconnected.
POWER Solid green Mains power is connected.
10
S Fixed & Variable Series
LE K POWER
www.stenner.com