Stenner Pumps S FIXED SERIE Manual De Instalación Y Mantenimiento página 11

OPERATION
S VARIABLE SERIES - S3V & S4V Models
• To turn the pump off, turn the potentiometer fully counterclockwise to
• To gradually increase the speed to 100% turn the potentiometer clockwise. Graduations
are approximate.
RUN /
F ULT
LED Indicator Lights
RUN/FAULT
RUN Solid yellow When the pump is running and not in drive fault.
FAULT Blinking red If pump has a drive fault error.
To Clear: Disconnect, then reconnect power, if FAULT is still present
contact factory for evaluation.
STANDBY/OFF
STANDBY Solid red Pump received a contact closure on the standby inputs.
To Clear: Automatically clears when pump no longer receives a contact
closure on the standby inputs.
OFF Blinking red When the potentiometer is set to
LEAK Blinking red When a leak is detected.
To Clear: Clears when the leak detect components are
free of chemical or residue and power to the pump is disconnected,
then reconnected.
POWER Solid green Mains power is connected.
USA and Canada 800.683.2378, International 904.641.1666
continued
STBY / LE K POWER
OFF
.
.
S Fixed & Variable Series
11