Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Mounting
2
5×
Mounting the safety switch on the wall
or other supporting structure
Mount the safety switch using (2) 3/16" and (2) 5/16" screws.
Note: Use the keyslot mounting hole to hang the enclosure
while securing the other mounting screws. Verify that the load-
carrying capacity of mounting wall or supporting structure is
sufficient in relation to the weight, size and way of fixing of
safety switch and in accordance with local requirements.
Anchorage:
– wall-mounted
– mount cabinet on flat surface to avoid distortion
– use shims if necessary
CAUTION
HAZARD OF INJURY OR EQUIPMENT DAMAGE
Do not in any circumstances bend or twist the locking hook fixed on
the door. Wrong position of the door hook causes the malfunction of
the locking mechanism that may result in personal injury or equipment
damage.
Failure to follow these instructions can result in injury or equipment damage.
Instruction Bulletin EOH364K, EOH365K, EOH366K, 1SCC340031M1401 / A | Installation 1/11
1
1
Publicidad
