Publicidad
Idiomas disponibles
Idiomas disponibles
Applications
The EOH series heavy duty fusible safety switches are
1
side-operated, 3 pole, 600V switches, housed in steel sheet
enclosures, available in UL environmental rating TYPE 1 with
side-operated handle.
Heavy duty fusible safety switches offer the ability to manually
open and close a circuit and provide overcurrent protection
through field installed fuses. Products can be used as
Disconnecting Means or on the load side of a branch circuit
protective device and are suitable for use as motor disconnects.
Neutral link
(optional)
Ground bus
The EOH364K, EOH365K, EOH366K heavy duty fusible safety switches up to 600 VAC, 3-ph with the ground bus (included) and the neutral link N (optional)
1/4 Applications | Instruction Bulletin EOH364K, EOH365K, EOH366K, 1SCC340031M1401 / A
Auxiliary contacts
(optional) inside the
mechanism
Fuses
(to be ordered separately)
Catalog numbers:
NEMA1: EOH364K, EOH365K, EOH365K
General purpose current ratings: 200A, 400A and 600A
Standards: UL98, UL50, UL4248-1, NEMA KS1, CSA
Enclosure material specification: Electrically galvanized steel,
polyester powder coating. Thickness: door 0.059 in /1.5 mm
(EOH364K/5K) and 0.079 in /2 mm (EOH366K), enclosure 0.059
in /1.5 mm (EOH364K/5K) and 0.079 in /2 mm (EOH366K).
Handle: glass reinforced polyamide (PA f1), polycarbonate (PC f1).
Enclosure color: ANSI 61 (light gray)
Disconnecting means
Short circuit protective device
Controller
Overload protection
Motor disconnection
Publicidad
