7.3 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements according to EU 65/2014 and
EU 66/2014. Tests according to EN 60350-1.
The oven door should be closed during
cooking so that the function is not interrupted
8. CLOCK FUNCTIONS
8.1 Clock functions
Clock function
Time of Day
Duration
Minute Minder
8.2 How to set: Clock functions
How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is
not set.
,
- press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
Step 1
- press repeatedly to change the time of day.
Step 2
,
- press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to set: Duration
Step 1
Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
- press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
and the oven operates with the highest
energy efficiency possible.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
Application
To set, change or check the time of day.
To set how long the oven works.
To set a countdown. This function has no effect on the operation of the
oven. You can set this function at any time, also when the oven is off.
- starts to flash.
.
- starts to flash.
ENGLISH
33