Oven functions
Oven function
Conventional Cook-
ing / Aqua Cleaning
Bottom Heat
Clock functions
Minute Minder + End of Cooking
Use it to set an automatic switch-off time for an
oven function.
1. Set an oven function and the temperature.
2. Turn the knob for the timer as far as it
goes, then turn it to necessary time period.
3. After the time period is completed, an
acoustic signal sounds. The appliance de-
activates.
Additional functions
Cooling fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of
the appliance cool. If you deactivate the appli-
ance, the cooling fan continues to operate until
the temperature in the appliance cools down.
Safety thermostat
Incorrect operation of the appliance or defec-
tive components can cause dangerous over-
Helpful hints and tips
• The appliance has five shelf levels. Count the
shelf levels from the bottom of the appliance
floor.
6
Off position
To bake and roast on one oven level. The top and bottom heating
For more information about Aqua Cleaning, refer to the chapter
To bake cakes with crispy or crusty bottom. Only the bottom heat-
Top Heat
To finish cooked dishes. Only the top heating element operates.
To grill flat food items in small quantities in the middle of the shelf.
Grilling
Application
The appliance is off.
elements operate at the same time.
"Care and cleaning".
ing element operates.
To make toast.
Normal setting
er to
. In this position you operate the appli-
ance manually. The Minute Minder + End of
Cooking is off.
heating. To prevent this, the oven has a safety
thermostat which interrupts the power supply.
The oven activates again automatically when
the temperature drops.
• The appliance has a special system which
circulates the air and constantly recycles the
steam. With this system you can cook in a
steamy environment and keep the food soft
: Turn the knob for the tim-
www.zanussi.com