Festool QUADRIVE PDC 18/4 Manual De Instrucciones página 13

Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging, inter-
mittent (NiCd, NiMH)
Charging times for BP, BPS and BPC battery
packs
Li-ion 1.5 Ah, 80 %/100 %
Li-ion 3.0 Ah, 80 %/100 %
Li-ion 4.2 Ah, 80 %/100 %
Permitted operating tempera-
ture range
Temperature monitoring
Safety class
Battery pack
Voltage
Capacity
Weight
4 Machine features
[1-1] LED light switch
[1-2] LED lamp
[1-3] Bit store
[1-4] On/Off switch
[1-5] Clamping sleeve
[1-6] Drilling/impact drilling selector switch
[1-7] Gear switch
[1-8] Torque thumbwheel
[1-9] Right/left switch
[1-10] Belt clip
[1-11] Button for releasing the battery pack
[3-1] LED-Display
[3-2] Cable holder
[4] Wall mount
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
5
TCL 3
Cordless impact drills are suitable for
220 - 240 V ~
– drilling in metal, wood, plastic and similar mate-
50/60 Hz
10.8 - 18 V=
– impact drilling into walls, concrete and similar
max. 3 A
– inserting and tightening screws
approx. 0.06 A
Charger TCL 3 suitable for
– charging Festool battery packs: BP, BPS and
approx. 25/35
– indoor use only.
min.
approx. 55/70
min.
approx. 70/90
6
min.
6.1
-5 °C to + 45 °C
via NTC resistor
6.2
/ II
Inserting the battery pack [2 A]
BPC 18 Li
Removing the battery pack[2 B]
18 V
4,2 Ah
6.3
0,7 kg
The LED [3-1] on the charger indicates the respec-
tive operating status of the charger.
Intended use
rials,
building materials,
BPC (NiMH, NiCd, li-ion are recognised automat-
ically.)
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
Operation
Charger cable holder[3-2]
Unwind the cable completely from the recess
before using the charger.
Changing the battery pack
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
Charging the battery pack [3]
LED yellow - lit continuously
Charger is ready to use.
LED green - flashes quickly
Battery pack is charged to maxi-
mum capacity.
LED green - flashes slowly
Battery pack is charged with
reduced current. Li-ion is
charged to 80 %.
LED green - lit continuously
Charging is complete or is not
restarted as current charge sta-
tus is greater than 80%.
LED red - flashes
General fault indication, e.g.
incomplete contact, short circuit,
defective battery pack, etc.
LED red - lit continuously
Battery temperature is outside
the permitted range.
PDC 18/4
GB
13