Mounting And Operation - Bosch FONTUS Instrucciones De Servicio

14 | English

Mounting and Operation

Representation/Action Objective
Product features
Delivery scope
Filling the water tank
Battery charging and inserting
Carrying and transporting
Connecting the hose
Switching on
Adjusting the jet strength
Spray-pattern variants
Using the brush
Switching off
Disconnecting the hose
Removing the battery
Maintenance
Storage
Accessories
Switching on
Charging the Battery
Observe the correct mains voltage! The voltage of the
u
power supply must correspond with the data given on
the nameplate of the battery charger. Battery char-
gers marked with 230 V can also be operated with 220
V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The Electronic Cell Protection (ECP) protects the lithium-ion
battery against deep discharging. When the battery is
empty, the machine is switched off by means of a protective
circuit: The pump stops.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the machine. The battery could become
damaged.
Observe the notes for disposal of the battery.
Inserting/Removing the Battery (see figures D
and L)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
F 016 L81 772 | (22.02.2018)
Press the battery compartment release button (15) to open
the battery compartment cover (14). Insert the charged bat-
tery (19). Ensure the battery is inserted correctly.
Figure Page
Close the battery compartment cover and ensure that the
A 216
lock of the battery compartment release button (15) has en-
B 217
gaged. The battery compartment cover (14) protects the
battery against splashed water during operation.
C 217
Press the battery compartment release button (15) to open
D 218
the battery compartment cover (14). To remove the battery
E 218
(19) from the machine, press the battery unlocking button
F 219
(20) and pull the battery out.
G 219
Charging Procedure
H 220
The charging procedure starts as soon as the mains plug of
I 220
the charger is plugged into a socket outlet and the battery
J 221
(19) is inserted onto the charger (21).
K 222
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery
is charged with the optimum charging current, depending on
L 222
battery temperature and voltage.
M 223
This gives longer life to the battery and always leaves it fully
N 223
charged when kept in the charger for storage.
O 224
Meaning of the Indication Elements (AL 1815
CV)
Flashing battery charge indicator
Continuous lighting of the battery charge indicator
Full
charged or that the temperature of the battery is not within
the allowable charging temperature range, and cannot be
charged for this reason. The battery is charged as soon as
the allowable charging temperature range is reached.
When the battery is not inserted, continuous lighting of the
battery charge indicator indicates that the mains plug is in-
serted in the socket outlet and that the battery charger is
ready for operation.
Meaning of the Indication Elements (AL 1830
CV)
(Fast) Flashing of the Green Battery Charge Indicator
dicator .
Note: The rapid-charging procedure is only possible when
the battery temperature is within the allowable charging
temperature range, see section "Technical Data".
(Slow) Flashing of the Green Battery Charge Indicator
flashes slowly.
The battery can be removed for immediate use.
The charging procedure is signalled by flashing
of the battery charge indicator .
Continuous lighting of the battery charge in-
dicator indicates that the battery is fully
The rapid-charging procedure is indicated by
fast flashing of the green battery charge in-
When the charging condition of the battery is
80%, the green battery charge indicator
Bosch Power Tools