Repeat Play; Random Play); Searching For Cd Text - Alpine CDE-9874 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
*
Displayed only when the AUX+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 17).
4
*
Displayed only when BT IN is set to BT ADAPTER, CDE-9874 only.
Refer to "Bluetooth Setting (CDE-9874 only)" (page 16).
2
While playing back MP3/WMA/AAC, press 1
2 to select the desired folder.
Pressing and holding 1
continuously.
3
Press
or
to select the desired track (file).
Returning to the beginning of the current track (file):
Press
.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
Press
.
Fast forward:
Press and hold
.
4
To pause playback, press
Pressing
/
/ENT again will resume playback.
5
To eject the disc, press
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
• The "DISC IN" indicator lights up when a disc is inserted.
CDE-9874 (compatible with MP3/WMA/AAC)/
CDE-9872 (compatible with MP3):
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• Direct playback of WMA files that are protected by DRM (Digital
Rights Management) is not possible on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
F101 T103
Folder number
display
• Press VIEW to switch the display. See "Displaying the Text"
(page 14) for information about display switching.

Repeat Play

Press
4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press
4 again and select off to deactivate repeat play.
or
or
2 will change folders
/
/ENT.
.
for at least 2 seconds.
File number
display
CD mode :
: Only a track is repeatedly played back.
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
M.I.X. (Random Play)
Press 5
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
CD mode :
: The tracks are played back in random sequence.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: The files are played back in random sequence.

Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
1
Press
/ESC during play.
This will set the search mode.
2
Turn the Rotary encoder (CDE-9874 only) or press
and
(CDE-9872 only) to select the desired
track, and then press
This will play the selected track.
• Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
• CD text search cannot be made during M.I.X. play.
again.
/
/ENT.
9
-EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cde-9872

Tabla de contenido