MOUNTING INSTRUCTIONS.
To mount onto wall, be sure there are no hidden electrical circuits or pipes in the
mounting location.
Place the mounting template (provided) on the wall to mark location of four mounting
screw holes.
Drill 5 holes (Fig.1) Ø8 (5/16") diameter and 45mm (1 ¾") depth.
Take off the residual dust from the holes.
Insert nylon plugs (provided) into the 5 holes (Fig.2-3).
Place the bracket to fix the hand dryer on the wall (Fig.4).
Fix the bracket firmly on the wall (Fig.5-6).
MOUNTING ITEMS PROVIDED.
5 screws.
5 Plugs.
1 Mounting template (printed on the box).
1 Instruction manual.
ANNEX
NYLON PLUG D8
-36-