Maintenance And Metrological Verification; Unpacking - Repacking - Metrix MX 23 Manual De Instrucciones

1.7.

Maintenance and metrological verification

Any adjustment, maintenance or repair work carried out on the multimeter while it is
live should be carried out only by appropriately qualified personnel, after having
taken into account the instructions in this present manual.
A "qualified person" is one who is familiar with the installation, construction and
operation of the equipment and the hazards involved. He is trained and authorized to
energize, de-energize circuits and equipment in accordance with established
practices.
Repair within or outside the warranty
Return your instrument to your distributor for any work to be done within or outside
the warranty.
1.8.

Unpacking - Repacking

All the equipment was verified mechanically and electrically before shipping.
When you receive it, carry out a quick check to detect any damage that may have
occurred during transport. If necessary, contact our sales department immediately
and register any legal reservations with the carrier.
In the event of reshipping, it is preferable to use the original package.
20
Chapter II
Portable digital multimeters