JVC DLA-RS65 Manual De Instrucciones página 70

3
Adjustments and settings in the menu (continued)
See Pixel Adjust Flow and Operation: Zone Adjust
After making overall adjustment for error across the entire screen, proceed to fine-tuning. The screen can be
divided vertically and horizontally into 10 sections to make adjustments. Press the [PIC ADJ] button on the
remote control to display the [Zone Adjust Window]. Or, from the main menu, set the [Adjust Area] to [Zone]
and select [Adjust Color] and [Adjust Pattern], then move the cursor to [Adjust(Fine)] and press the [OK]
button on the remote control to display the adjust pattern and the zone adjust window.
(*) The range of adjustment may narrow depending on the adjust amount of the entire screen.
Zone cursor
Zone Adjust Window
Use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to move the cursor to the position you want to adjust.
Press the [OK] button on the remote control to enter the adjust operation mode. Use the [UP], [DOWN],
[LEFT], and [RIGHT] buttons to move and adjust pixels in the vertical and horizontal directions within the
zone. The adjustment settings appear in the center of the Zone adjust window along with the cursor position.
Use the [BACK] button to exit the adjust operation mode.
Pixel adjust setting
Remote Control
Operation Guide
(Reference page: 68)
70
Operation
Zone Adjust
Color A.
GAMMA
H0
Zone Adjust
ADJUST.
Color A.
COLOR.
GAMMA
TEMP
cursor-position
Adjust setting
Pixel Adjust
Red
Position 8 / 5
H - 31
V - 7
Select
ADJUST. Color P. A. Area
BACK
COLOR. COLOR. PIC.
BACK
Operate
TEMP P.FILE. ADJ.
H (Horizontal)
Zone Adjust window
Pixel Adjust
Position 8 / 5
H - 31
V - 7
Color P. A. Area
COLOR. PIC.
P.FILE. ADJ.
Adjust Pattern
H10
Adjust Color
Red
Select
BACK
BACK
Operate
V0
V10