Other operations
Rotate the VOL control to
adjust the volume.
Press (DSPL) to display
the memorized names.
Tip
If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for two
seconds to turn off the clock indication after
turning off the engine.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
Press (ATT) to
attenuate the
sound.
Press (OFF) to
turn off the unit.
Press (SOUND) to
If you need to mount the rotary commander on
adjust sound
the right hand side of the steering column, you
menu.
can reverse the operative direction.
Tip
You can also change the operative direction of
these controls with the unit (see "Changing the
sound and display settings" on page 26).
To increase
To decrease
Press (SOUND) for two seconds while
pushing the VOL control.
25