Product Information; Description; Features - Franklin Electric MONODRIVE UTILITY Manual Del Usuario

PRODUCT INFORMATION

Description

The Franklin Electric MonoDrive Utility is a variable frequency drive (VFD) designed to control and
protect 3-wire, single-phase 230 V motors, enhancing pump performance for residential and light
commercial water system applications. When used with Franklin Electric motors ranging from ½ to
2 HP, the MonoDrive Utility drives a motor and pump at variable speeds to maintain constant water
pressure, even as user demands (water flow) change.
The MonoDrive Utility is designed to convert a conventional pump system to a
variable speed constant pressure system by simply replacing the pressure
switch and control box.

Features

Configuration
• Compatible with submersible pumps
• No programming required with easy DIP switch setup
• Pressure sensor included for ease of installation
• Additional input for optional transducer for more precise control
• Works with small pressure tanks or existing larger tanks
Operation
• Three LED indicators for system status and troubleshooting
• 30 – 63 Hz frequency range with submersible motors
• Accessory filtering available to remove radio frequency interference
Protection
• Protection against short circuit, under-load, overload, overheat, under-voltage, over-voltage,
surges, open circuit
• Broken-pipe detection
• User-defined under-load sensitivity
• Soft-start feature prevents water hammer and increases motor life
Communication
• USB port allows for easy firmware updates
• USB port allows for easy Event Log downloads
PRODUCT INFORMATION
Description
7