EN-28
6. Once the linearity calibration is completed successfully,
"Linearity done" will display.
Press any button to return to the previous screen.
5.3 Balance Setup
Enter this sub-menu to customize balance functionality.
Note: The factory default settings are shown below in bold.
5.3.1 Language
Set the language displayed for menus and displayed
messages.
English
Chinese
Japanese
Korean
5.3.2 Filter Level
Set the amount of signal filtering.
Low
= faster stabilization time with less stability.
Medium
= normal stabilization time with normal stability.
High
= slower stabilization time with more stability.
5.3.3 AZT (Auto Zero Tracking)
Set the automatic zero tracking functionality.
Off = disabled.
0.5 d = display maintains zero up to a drift of 0.5 graduation per second.
1 d = display maintains zero up to a drift of 1 graduation per second.
3 d = display maintains zero up to a drift of 3 graduations per second.
5.3.4 Auto Tare
Set the automatic tare.
Off = disabled.
On = enabled.
Note: "Place container" will be displayed when Automatic Tare is set to On.
PX Series Balance