Manual White Balance Adjustment; Wipe Or Fader Effects - JVC GR-D347U Manual De Instrucciones

FEATURES FOR RECORDING
30
EN

Manual White Balance Adjustment

Adjust the white balance
manually when shooting
under various types of
lighting.
1
Set the Power Switch
to "REC".
2
M
Set the recording
mode to " ". pg. 13)
(
3
Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
4
Select FUNCTION Menu.
5
Select "MWB" in "W.BALANCE" menu
( pg. 22), then press and hold SET or 2 until
begins blinking.
● When the setting is completed,
6
Press SET or 2 to engage the setting.
7
Press MENU. The Menu Screen closes and
the Manual White Balance indicator
displayed.
NOTES:
÷ In step 3, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
( pg. 27)
● A subject can be shot under various types of
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the color temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
● Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
White paper
pg. 22)
(
stops blinking.
is

Wipe Or Fader Effects

These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1
Set the Power Switch to "REC".
2
Set the recording mode to "
3
Set "WIPE/FADER" in FUNCTION Menu.
( pg. 22)
● The WIPE/FADER menu disappears and the
effect is reserved.
● The selected effect indicator appears.
4
Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
To deactivate the selected effect
Select "OFF" in step 3. The effect indicator
disappears.
NOTE:
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
WIPE/FADER
OFF: Disables the function. (Factory-preset)
WHITE : Fade in or out with a white screen.
BLACK : Fade in or out with a black screen.
SLIDE : Wipe in from right to left, or wipe out
from left to right.
SCROLL : The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
M
". pg. 13)
(