Automation system
•
Keep oiled the jointed arm's pin, the boss that works coupled
to the motor output shaft and all parts subject to wear due to
friction.
•
check how the safety devices are working (pneumatic edge,
torque limiter, etc.).
Extraordinary maintenance or breaks
•
If major work on mechanical and/or electromechanical parts
must be carried out, the gear motor should be removed for re-
pair in the workshop by the manufacturer's or other authorised
technicians.
EASY INSTALLATION
1 -
Gearmotor
Accessories:
2-
Control panel
3 -
Radio receiver
4 -
Aerial
5 -
Flashing light
6 -
Key selector
7 -
Safety photocells
8 -
Posts for photocells
9 -
Ground-mounted gate stop in open position
10 - Electric lock
EASY 12 - EASY-BR INSTALLATION
1 -
Gearmotor
Accessories:
2-
Control panel
3 -
Radio receiver
4 -
Aerial
5 -
Flashing light
6 -
Key selector
7 -
Safety photocells
8 -
Posts for photocells
9 -
Ground-mounted gate stop in open position
10 - Electric lock
The distance between the control unit and the motor must not ex-
ceed 10 – 12 m.
GUARANTEE: GENERAL CONDITIONS
TAU guarantees this product for a period of 24 months from the
date of purchase (as proved by the sales document, receipt or in-
voice).
This guarantee covers the repair or replacement at TAU's expense
(ex-works TAU: packing and transport at the customer's expense)
of parts that TAU recognises as being faulty as regards workman-
ship or materials.
For visits to the customer's facilities, also during the guarantee pe-
riod, a "Call-out fee" will be charged for travelling expenses and
labour costs.
The guarantee does not cover the following cases:
•
If the fault was caused by an installation that was not per-
formed according to the instructions provided by the com-
pany inside the product pack.
•
If original TAU spare parts were not used to install the prod-
uct.
•
If the damage was caused by an Act of God, tampering,
overvoltage, incorrect power supply, improper repairs, in-
correct installation, or other reasons that do not depend on
TAU.
•
If a specialised maintenance man does not carry out routine
maintenance operations according to the instructions pro-
vided by the company inside the product pack.
•
Wear of components.
The repair or replacement of pieces under guarantee does not ex-
tend the guarantee period.
In case of industrial, professional or similar use, this warranty is
valid for 12 months.
10
EASY Series