Before Installation - Toto CST474CEF Manual De Instrucciones

„ Read these instructions thoroughly before beginning work.
„ Please leave instructions for customers. These instruction contain maintenance
and warranty information.
„ If necessary, remove the existing toilet.
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity
flushing systems, they are not specified for back-to-back installations. The only
means of installing these toilets in a back-to-back situation is when the toilet drain
connections incorporate a WYE fitting. Please contact your builder or contractor prior
to this installation.
In order for your new TOTO toilet to fit correctly, check the dimensions below:
1) The distance between
the finished wall to
the center of the toilet
outlet, rough-in "RI":
Please make sure that you have the correct outlet connection part:
"RI"
TSU01W.12R / TSU03W.12R
12" (Supplied)
TSU01W.10R / TSU03W.10R
10" (Optional - Must be purchased separately)
TSU01W.14R / TSU03W.14R
14" (Optional - Must be purchased separately)
12" TSU02W.12 (Supplied for CST794SF/CST794EF)
Removing Existing Toilet (if necessary)
1) Turn off water supply
2) Flush the toilet, remove any remaining water from tank and bowl.
3) Disconnect water connector.
4) Remove tank and bowl.
5) Remove old wax seal and mounting bolts.

BEFORE INSTALLATION

Double Combination WYE / 1/8 Bend
YES
Supply
Valve
Outlet Connection Part No.
Double Sanitary Tee / Sanitary Cross
Finished Wall
"RI"
3
NO
C/L
Closet
Flange
9"
7 "
11"