Before Installation - Toto AQUIA IV CST446 Serie Manual De Instrucciones Y Del Propietario

Read these instructions thoroughly before beginning work.
Please leave instructions for customers. These instructions contain
maintenance and warranty information.
If necessary, remove the existing toilet and if new construction, purge the
supply line.
NOTICE
Due to the powerful performance of our Tornado, G-Max, E-Max and Power
The only means of installing these toilets in a back-to-back situation is when
builder or contractor prior to this installation.
Double Combination WYE / 1/8 Bend
YES
Water supply shut-off valve installation recommendations
Follow these recommendations to ensure an optimal and trouble-free
installation with a neat and professional appearance.
Location
Valve type
Maximum length

BEFORE INSTALLATION

4-3/4" x 4-3/4" (120mm x 120mm)
Angle stop type valve with supply connection
facing upward, inward, or downward
NOTE: Straight stop type valve, or valve with
supply connection on front of angle stop, is not
recommended
Angle stop must protrude less than 3" (80mm)
from wall
Centerline of
Flange
Double Sanitary Tee / Sanitary Cross
Centerline of
Stop valve
4¾"
(120mm)
"RI"
3
NO