Sanus VSL4 Manual De Instrucciones página 14

STEP 2B
Solid Concrete or Concrete Block Option
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the arm assembly/wall plate
●
Minimum solid concrete thickness: 203 mm (8 in.)
●
Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
1. Position the wall plate template
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2. Drill two pilot holes using a 10 mm (3/8 in.) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 75 mm (3 in.). Never drill into the mortar between blocks.
1
14
18
directly onto the concrete surface
17
on the wall at your desired height. Level the wall plate template and mark the hole locations.
17
2
75 mm
(3 in.)
10 mm
(3/8 in.)
17