Napa 6-727 Manual De Instrucciones página 5

OPERATION
This ratchet wrench is rated
at 1/4" USS bolt size. Rating
must be down graded for
spring U bolts, tie bolts, long
cap screws, double depth
nuts, badly rusted conditions
and spring fasteners, as they
absorb much of the impact
power. When possible,
clamp or wedge the bolt to
prevent springback.
Soak rusted nuts in
penetrating oil and break
rust seal before removing
with ratchet wrench. If nut
does not start to move in
three to five seconds use a
larger size ratchet wrench.
Do not use ratchet wrench
beyond rated capacity, as this
will drastically reduce
tool life
Forward/Reversing
Button
PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE THIS MANUAL FOR FUTURE REFERENCE.
6-727
The forward/reversing
button is used to change the
rotation of the tool. When
the lever is set in forward
position (F), the tool will
turn in a right hand rotation.
When the lever is moved to
the reverse position (R), the
tool will run in reverse or
left hand rotation.
NOTE: Actual torque on a
fastener is directly related to
joint hardness, tool speed,
condition of socket and the
time the tool is allowed
to impact.
Use the simplest possible
tool-to-socket hook up.
Every connection absorbs
energy and reduces power.
Air Inlet
S
PECIFICATIONS
Drive ..............................1/4"
Standard Bolt Size ........3/8"
Torque Range ................10-20 ft./lbs.
Max. Torque ................25 ft./lbs.
Overall Length ............7-1/4"
Net Wt. ........................1.14 lbs.
Avg. Air Cons. ..............2.5 CFM
Air Inlet ........................1/4"NPT
Min. Hose Size ..............3/8" ID
Recom.. Air Pressure ....90 PSIG
Free Speed ....................230 RPM
Sound Level ..................87 dBA
5