Mounting (Tower) - Tripp-Lite AG-SM7145 Serie Manual Del Propietário

Mounting (Tower)

2-Post (Telecom) Mounting
Two-post mounting will require a Tripp Lite 2-Post Rack-Mount Installation Kit (Model
2POSTRMKITWM, sold separately). For detailed installation procedures, see the
2POSTRMKITWM Owner's Manual.
Mount all UPS models in an upright, tower position using included hardware. The user
must determine the fitness of hardware and procedures before mounting.
Stand your UPS on its side with the LED/
1
Control panel at the top. Attach one rack
mounting ear
using included screws
mounting ears to the floor with
user-supplied hardware.
Rotate the LED/Control panel to view it
2
easier while the UPS is tower mounted.
Insert a small screwdriver, or other tool,
in the slots on either side of the panel.
Pop the panel out; rotate it; and pop the
panel back in place.
Note: For additional stability, order the 2-9USTAND
expandable tower stand accessory.
to each side of the UPS
A
. Attach the rack
B
1
2
5
B
A