Yamaha RAPTOR 250 Manual Del Propietário página 162

1. Bring the machine to a stop by applying the
front brake.
2. With the front and rear brake applied, pull the
clutch lever, shift into the neutral position,
and then apply the parking brake.
3. Stop the engine by setting the engine stop
switch to "
4. With the front and rear brakes applied, pull
the clutch lever, shift into 1st gear, and then
slowly release the clutch lever, brake lever
and brake pedal.
NOTE:
_
Make sure that the neutral indicator light goes off.
_
5. Turn the key to "OFF".
6-29
".