Start Switch - Yamaha RAPTOR 250 Manual Del Propietário

1. Light switch " / /OFF"
2. Engine stop switch " /

3. Start switch "

"
1. Contacteur d'éclairage "
2. Coupe-circuit du moteur "
3. Contacteur du démarreur "
1. Interruptor de luces "
2. Interruptor de paro del motor "
3. Interruptor de arranque "
"
/ /OFF"
/ "
"
/ /OFF"
/ "
"
Engine stop switch "
Make sure that the engine stop switch is set to
" " before starting the engine. The engine stop
switch controls ignition and can be used at all
times to stop the engine, especially in an emer-
gency. The engine will not start or run when the
engine stop switch is set to "
Start switch "
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
_
See starting instructions prior to starting the
engine. (See page 6-3 for details.)
_
4-7
/ "
".
"
EBU12050
EBU06070