Installation Of Safety Support - Kichler 330161 Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT

(Required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan
from falling, please install it as follows.
Step 1. Attach the provided wood screw to the ceiling joist next to
the mounting bracket. (Fig. 10)
Step 2. Adjust the length of the safety cable to reach the screw
by pulling the extra cable through the cable clamp until the overall
length is correct, put the end of the cable back through the cable
clamp, forming a loop at the end of the cable. Tighten the cable
clamp securely. Now, put the loop in the end of the safety cable over
the wood screw securely.
NOTE: Although the safety support cable is required for Canadian
installations only. It's a good idea to make the attachment with
any installation.
Hanger bracket
Safety cable
Attach safety cable
to ceiling joist with
screw
Fig. 10
11
52" Renew Select |