Installation Of Safety Support (Canada Only) - Kichler cULus 300285/85-GENT Serie Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT
(Required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan
from falling, please install it as follows.
Step 1. Attach the provided wood screw and washers to the ceiling
joist next to the mounting bracket but do not tighten. (Fig. 12)
Step 2. Adjust the length of the safety cable to reach the screw and
washers by pulling the extra cable through the cable clamp until the
overall length is correct, put the end of the cable back through the
cable clamp, forming a loop at the end of the cable. Tighten the cable
clamp securely. Now, put the loop in the end of the safety cable over
the wood screw securely.
NOTE: Although the safety support cable is required for Canadian
installations only, it's a good idea to make the attachment with
any installation.
Ceiling mounting
bracket
Attach safety cable
to ceiling joist with
screw and washer
Fig. 12
11
60"/65"/85" GENTRY