Kärcher IVC 60/24-2 Tact 2 Manual De Instrucciones página 8

Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
– Before first start-up it is definitely necessary to read
the safety indications Nr. 5.956-249.0!
– The non-compliance of the operating and safety in-
structions may lead to damages of the appliance
and to dangers for the operator and other persons.
– In case of transport damage inform vendor immedi-
ately.
Environmental protection
Danger or hazard levels
Proper use
Device elements
Start up
Operation
Transport
Storage
Care and maintenance
Troubleshooting
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Declaration of Conformity (UK)
Technical specifications
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
Danger or hazard levels
DANGER
Pointer to immediate danger, which leads to severe in-
juries or death.
WARNING
Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can
lead to property damage.
8
Contents
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
WARNING
The appliance is not suitable for vacuuming dust which
endangers health.
– The machine is meant for dry and wet cleaning of
floors and walls.
– This appliance is suited for commercial and indus-
trial use, e.g. in storage and assembly areas and
on production machines.
– The appliance is not approved for crane loading.
Device elements
1 Power cord
1
2 Nameplate
1
3 Filter dedusting
1
4 Flat fold filter
1
5 Suction head
1
6 Handle of the suction head
1
7 Right unlocking of the placement mechanics
2 8 Intermediate ring
9 Steering roller of the dirt container
2
10 Stopper
2
11 Dirt receptacle
3
12 Left unlocking of the placement mechanics
3
13 Wheel
3
14 Suction head lock
3
15 Suction support
4
16 Steering roller of the chassis with parking brake
4 17 Floor nozzle holder
18 Chassis
19 Drain pan
20 Handle of the dirt container
21 Holder for suction pipe
22 Connection plug of the thermal probe
23 "Ready for use" indicator lamp
24 Rotating knob
25 Filter cover
26 Cable clamp
27 Push handle
28 Opening of the protective cover
29 Protective cover
30 Thermal probe
 Bring the appliance to working position - secure it,
if required, with parking brakes.
 Insert the suction hose (not included) into the suc-
tion hose connection.
 Check the fill level in the dirt container prior to start-
ing work and empty the container if necessary.
 Ensure that the dirt container has been inserted
properly.
 Attach the desired accessories (not included).
CAUTION
The flat pleated filter must always be in place while vac-
uuming.
– 1
EN
Proper use
Start up
Operation