Sharp CD-M10000V Manual De Manejo página 17

Ocultar thumbs Ver también para CD-M10000V:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9
Select the desired menu number using the direct search buttons
on the remote control.
z Playback will begin.
z After playback has finished, the menu will reappear. Select the menu number
you want to play.
To interrupt playback:
Press the CD
button on the remote control.
To resume playback from the same point, press the
To stop the current operation and return to the menu:
Press the
button for less than 0.5 seconds.
To completely stop the video CD:
Hold down the
button for more than 1 second.
To remove the video CDs:
Whilst in the stop mode, press the
OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
z If the DISC SKIP button does not allow to rotate the disc tray (you cannot remove
the disc), close and open again the tray.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Notes:
z During playback, you can select another disc by pressing either of the DISC SKIP
button or one of the
1 -
3 buttons.
z Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be
selected even if you press the DISC SKIP button or one of the
z Playback control allows a video CD to be played back according to instructions
recorded on the disc. The "previous", "next", "return" and "select" operations may
function differently, depending on the PBC CDs.
z Some video CDs with playback control may have an "auto pause" recorded on
them. When such a disc is played, the screen will stop automatically at the point
where an "auto pause signal" has been inserted.
z If the picture looks dirty when a video CD is played back, there may be a scratch
on the video CD. Replace it with another video CD in good condition.
The P.B.C. function will not work in the following conditions.
z When repeat, random, programme, bookmark, resume, disc digest, track digest or
time search play has been selected and playback begins.
z When track numbers are selected using the direct search, the
(
) or
PRESET
(
) button, and playback begins.
„ To move the menu screen (menu screen
with more than 1 page)
To move to the next menu screen:
Whilst in the stop mode, press the
button.
To return to the previous menu screen:
Whilst in the stop mode, press the
Notes:
z This function may not work, depending on the disc.
z The
or
tion.
„ To play without activating the playback
control function
You can play a video CD with P.B.C. without activating the playback control function.
In this case, the menu screen will not appear, and the disc will be played in the same
way as a video CD without P .B.C.
1
Whilst in the stop mode, press the P.B.C. (P.B.C. AUTO/OFF) but-
ton to cancel the P.B.C. mode.
1 -
3 buttons.
The P.B.C. function cannot be cancelled whilst the menu screen is displayed.
2
Press the
Playback will begin.
Notes:
z The P .B.C. function can also be cancelled whilst in the playback mode.
z Some video CDs with P .B.C. cannot be played back when the P .B.C. mode is off.
PRESET
z See pages 17 - 24 to perform various playback functions without activating the
P.B.C. function.
PRESET
button.
PRESET
button.
button on the remote control allows you to locate the desired por-
<TV screen>
PBC OFF
(
) button.
01/10/30
CD-M10000V(X)E2.fm
CD-M10000V
ENGLISH
1
2
3
4
5
6
7
E-16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cp-m10000

Tabla de contenido