EHEIM 1046 Instrucciones página 8

English
Thank you
for puchasing your new EHEIM pump that provides optimum performance
with maximum safety and reliability.
Safety instructions
Read the operating and safety instructions carefully and comply with all instructions
prior to operating this device. Keep these operating instructions in a safe place.
ll electrical equipment in the water must be disconnected from the mains during
care and maintenance work.
The connecting line of this device can not be replaced. When the line is damaged,
the device must no longer be used. Never carry the pump by the cable; do not bend
the cable.
The pumps may only be used in garden ponds and their area of protection if instal-
led according to prevailing regulations. s a means of protection against overly high
shock hazard voltage, the installation must show a leakage current safety guard with
a rated residual current of no more than 30 m . Please consult your electrician.
This equipment can be used by children above the age of 8 or by persons with redu-
ced physical, mental or sensory capacities or a lack of experience or knowledge,
provided they are supervised or have received instruction in the safe use of the
equipment and therefore understand the risks involved. Do not allow children to play
with this equipment. Do not allow children to clean or conduct user maintenance
without supervision.
For your own safety we recommend that you make a drip loop with
the power cord. This drip loop prevents any water running along the
cord from reaching the electrical socket. If an extension lead with
several sockets or an external power supply is used, place it above
the pump power connection.
20 cm
fers to pacemakers. Please consult the manuals of medical equipment for the requi-
red safety margins.
ttention: Maintenance work presents the risk of crushing the fingers due to high
magnetic forces.
Do not clean the unit – or parts of it – in the dishwater. Not dishwater resistant.
Do not dispose of this product as normal household waste. Take it to your local refu-
se collection site.
The product is qualified in accordance with the respective national regulations and
guidelines and meets EC standards.
Function
a
Motor body
d
impeller-set
tion grille
The pump can be used both in and out of the water. It is not self-priming and
to operate, must therefore be positioned on the outside of the tank – below
the water level.
Putting into operation
To make it operate, suck briefly at the end of the pressure hose, until water
flows to the pump. Do not insert power supply plug until you have done this.
A brief noise when the pump starts up is normal.
There are several alternatives for using the hobby pump; when used out of the
Notice: These divices produce magnetic fields which might cause
electronic and mechanical disturbances or damages. This also re-
Universal Pump 1046019 - 1046209
– suitable for outdoor use –
Model: see type plate on pump housing
b
fixing plate
e
pump cover with O-ring
h
threaded adaptor, suction side
c
threaded adaptor, pressure side
f
i
cap.
g
coarse filter suc-