Panasonic SC-PM602 Instrucciones De Funcionamiento página 7

Link mode
BLUETOOTH
You can change the link mode to suit the connection
type.
Preparation
If this system is connected to a Bluetooth
disconnect it (Z"Disconnecting a device").
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [R, T] to select the mode and then press
[OK].
MODE 1 Emphasis on connectivity.
MODE 2 Emphasis on sound quality.
(default)
Note:
• Depending on the device, the playback image and sound
may not be synchronised. In this case, select "MODE 1"
• Select "MODE 1" if the sound is interrupted.
Input level
BLUETOOTH
You can change the input level setting if the sound input
level of the Bluetooth ® transmission is too low.
1
Press [PLAY MENU] repeatedly to select
"INPUT LEVEL".
2
Press [R, T] to select the level and then press [OK].
(default)
Note:
"LEVEL 0"
Select if the sound is distorted.
█
Note on disc
• This system can play CD-R/RW with CD-DA or MP3
format content.
• Before playback, finalise the disc on the device it was
recorded on.
• Some CD-R/RW cannot be played because of the
condition of the recording.
device,
®
█
Note on USB device
• This system supports USB 2.0 full speed.
• This system can support USB devices of up to 32 GB.
• Only FAT 12/16/32 file system is supported.
█
Note on MP3 file
• Files are defined as tracks and folders are defined as
albums.
• Tracks must have the extension ".mp3" or ".MP3".
• Tracks will not necessarily be played in the order you
recorded them.
• Some files can fail to work because of the sector size.
.
MP3 file on disc
• This system can access up to:
– 255 albums (including root folder)
– 999 tracks
– 20 sessions
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
MP3 file on USB device
• This system can access up to:
– 800 albums (including root folder)
– 8000 tracks
– 999 tracks in one album
7
7