Descargar Imprimir esta página

Troubleshooting Guide - BH FITNESS G865 Manual Del Usuario

Ocultar thumbs Ver también para G865:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
When the minute is up, the electronic device will work
out the difference and your fitness rating will be
displayed up on the screen: "F1, F2,..., F5, F16; where
F1 is the best (fi tness "Excellent") and F6 the worst (fi
tness "Very Poor").
Pressing the "PULSE/RECOVERY" button will take you
back to the main screen, where the functions will be in
the same mode as when the TEST began.
The comparison between the worked heart rate and
the recovery heart rate provides a fast, simple method
of gauging how fit you are. Your fitness rating is a
guideline that shows you how fast your heart recovers
after physical exertion. If you exercise regularly then
you will see your fitness rating improve.
The test will not work if the sensor is not connected
correctly or if the error code "E1" appears on the
screen.
The TEST will not work if you do not have both hands
placed on the hand-grip sensors (R) Fig.4 after you
have stopped doing the exercise.
If the error code "E1" is shown on the screen then this
means that you do not have your hands positioned
correctly on the hand-grip sensors (R).
If the error code "E2" appears on the screen, this
means that you have not stopped exercising.
FITTING THE ELECTRONIC MONITOR
Next, connect terminals (128) (130), sticking out of the
handlebar (2), and terminal (B) (C), sticking out of the
monitor (123), Fig.5.
Place the monitor (123) on top of the plate on the main
post (2), as shown in Fig.5, making sure not to pinch
the wires.
Use screws (46) to hold the monitor in place, Fig.5.

TROUBLESHOOTING GUIDE

display comes on but only the Time function Works.
Solution:
a.-Make sure that the connection cable is connected.
(24 AC Transformer)
Problem: The monitor does not switch on.
Solution:
a.-Check the 220 V mains connection
b.-Check the output connection from the transformer to
the monitor.
c.-Check the monitor cable connections.
d.-Check the cable connections for the main post..
Avoid leaving the electronic monitor in direct sunlight
as this might damage the liquid crystal display.
Similarly, do not expose it to water or knocks.
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR NOTICE
10
MOD. G865
Problem: The

Publicidad

loading