Soundcore Liberty 2 Pro Manual Del Usuario página 7

Soundcore App
Make sure the earbuds firmware is always up-to-date before using.
Download the Soundcore App for HearID, UI customization, EQ settings, and earbuds
firmware update.
• HearID: HearID maps your personal hearing sensitivity at multiple frequencies and analyzes
the results. It tailors the EQ settings and creates a personalized sound profile for you.
• UI customization: In stereo mode, all of the controls can be customized in the App. In
mono mode, the controls are fixed.
• EQ settings: There're more than 20 EQ settings you can choose in the App to optimize
your experience while enjoying different music genres.
• Earbuds firmware update: The earbuds firmware can be updated in the App. You will be
informed once the new version of firmware is detected when you connect the earbuds
with the App.
Reset
Reset the earbuds if the earbuds cannot connect properly with each other or with your device.
Place the earbuds into the charging case and make sure they are being charged. Keep the
charging case open, then press and hold the button on the charging case for 10 seconds until
the LED indicators on both earbuds flash red 3 times.
All the memory data will be cleared.
1
10"
05 EN
Soundcore
Google Play and the Google Play logo are
trademarks of Google Inc.
Apple and the Apple logo are trademarks
of Apple Inc.
2
3