Soundcore Liberty 2 Pro Manual Del Usuario página 4

LED indicators (Earbuds)
Breathing white
Steady white for 1 second
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
1
LED indiators (Earbuds)
Flashing white
Steady white for 1 second
• In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice "connection unsuccessful" when you
tap "Pair" or even no screen pops up. Don't worry and it will not influence the using.
• Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
TWS connecting
TWS connected
2
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro
Bluetooth pairing
Bluetooth connected
3
Pair
Bluetooth Pairing Request
"Headset" would like
to pair with your Phone
Cancel Pair
EN 02