Metra 99-3020 Instrucciones De Instalación página 2

1. Open the passenger door and glove
compartment, then unclip and remove
the trim panel on the side of the dash.
(Figure A)
2. Remove (1) 9/32" screw securing the
vent/trim panel above the glove box,
then unclip and remove the panel.
(Figure B)
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
3. Unclip and remove the trim panel
between the steering column and the
climate controls. (Figure C)
4. Unclip and remove the trim panel
surrounding the radio and hazard
switch. (Figure D)
Continued on the next page
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com