Metra 99-3020 Instrucciones De Instalación página 4

1. Remove the (1) 9/32" screw from the
center of the dash cavity (Figure A).
2. Cut and remove the shaded area
indicated in the dash cavity. (Figure B)
4
KIT PREPARATION
(Figure A)
Remove shaded area
(Figure B)
3. Attach the hazard switch removed
in dash disassembly into the radio
housing. (Figure C)
4. Attach the (6) panel clips provided onto
the radio trim panel. (Figure D)
Continue to Kit Assembly
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com