jbc RWS-A Manual De Instrucciones página 4

Assembly
1. Setting up the Tool Arm
Fit the tool arm onto the base and tighten the
screw.
3. Mounting the Tool
Insert the tool as far as possible.
Place the hose in the clamp.
4
Allen key
2. Inserting the Adapter (JT / TE)
Slide the adapter along the hose to the end of
the handle.
Height Adjustment
The RWS-A Arm allows adjustment for
different heights according to your work
needs.
Upper knob
Lower knob
Slide the tool holder to the appropriate height
and secure by tightening the lower knob to
guarantee stability. Make sure the upper knob
is loosened before sliding the tool holder.
Adapter