Air Inlet; Regular Maintenance - M7 NE-451R Manual Del Usuario

Maintenance:
1. Before connecting the air hose to this tool or after operating, apply 4 or 5 drops of pneumatic
oil into the air inlet and run it for several seconds, referring this operation to the attached
picture.
2. Maintain this tool regularly by performing the same oiling application every 3 to 4 hours of
operation.
3. Do not lubricate tools with flammable or volatile liquids. Use only the lubricant recommended
by Mighty-Seven or authorized dealers. Any other lubricant will lead to reduce performance of
the tool and permanent damage. Whenever any unauthorized lubricant is used by accident,
flush it immediately with recommended pneumatic oil.
4. Follow all the recycling laws of waste disposal once this tool is no longer usable.
Pneumatic oil

Regular maintenance

Air inlet

3