Assembly - Kemper SmartFil Instrucciones De Servicio

5 Assembly

NOTE
The product operator may only assign the independent assembly of the
product to personnel who are familiar with this task.
Two people are needed to assemble the product.
Ensure that the welding current return line between the workpiece and
the welding machine has a low resistance and that connections between
the workpiece and the product are avoided so that the welding current
cannot flow back to the welding machine via the product's protective
conductor.
NOTE
If add-on products are also present, follow the appropriate manuals when
assembling them.
1502818-03
Fig. 9: Assembly
- 56 -
EN