Assembly - Kemper ProfiMaster Instrucciones De Servicio

5 Assembly

NOTE
The product operator may only assign the independent assembly of the
product to personnel who are familiar with this task.
Two people are needed to assemble the product.
You must ensure that the welding current return line between the
workpiece and the welding machine has a low resistance and that
connections between the workpiece and the product are avoided so that
the welding current cannot flow back to the welding machine via the
product's protective conductor.
NOTE
If add-on products are also present, follow the appropriate manuals when
assembling them.
1502763-02
Fig. 13: Assembly
- 60 -
EN