Use; Qualification Of The Operating Personnel; Operating Controls - Kemper ProfiMaster Instrucciones De Servicio

EN

6 Use

Every person who deals with use, maintenance and repair of the product
must have thoroughly read these operating instructions as well as the
instructions for any attachment and accessory products and have
understood them.

6.1 Qualification of the operating personnel

The operating company of the product may only commission persons to
use the product independently if they are well-versed in this task.
Those familiar with this task includes those who have been instructed
appropriately in the task and know the operating instructions as well as the
operational issues in question.
The product should only be used by trained or instructed personnel.
This is the only way to ensure safety and hazard awareness of all personnel
during work.

6.2 Operating controls

Operating controls and connection options are located on the front side of
the product:
Fig. 14: Operating controls
1502763-02 - 62 -