Block Module Exchange; Introduce The Home Screen - LongGene A200 Manual Del Usuario

1.5 Block Module Exchange

Block module exchange can be performed within seconds without tools.
To remove the block module:
1. Open the lid
2. Put your hand on the left and right side of the block module and lift it up
vertically.
3. Store the block module in a clean, secure box.
To insert the block module:
Put your hand on the left and right side of the block module, with the arrow on
block module pointing to another arrow on the chassis. Place the block into the
hollow cavity of the chassis and press tightly and evenly.

2. Introduce the Home Screen

When the instrument powers on, the boot screen is displayed for several
seconds. The Home screen is displayed (see below).
Items in the Home screen:
IMPORTANT!
Please power off and disconnect the power cable from the socket before
replacement of the block.
a
44
b