Changing Temperature And Hold Time In A Gradient Step - LongGene A200 Manual Del Usuario

1.4 Changing Temperature and Hold Time in a Gradient Step

Gradient Temperature Step is only available with reference ZFD002 Gradient
Type Thermal Cycler.
To change temperature value:
2. In the Edit Program screen, touch up or down temperature box to open the
2. Touch Left and Right to enter temperature of the left and right column of
To change hold time:
1. Touch hold time box.
2. Enter a value in the pop-up keyboard and then touch Ok.
Gradient Temperature Edit window.
sample block. The right part of the window will display calculated temperature
gradient from the first column to the last column (from the 1
wells sample block module).
The allowable gradient temperature range:
Left: 30°C ~ 104°C;
Right: 31°C ~ 105°C;
Difference between the Left and Right: 1°C ~ 30°C.
52
st th
to 12 for the 96