Changing Temperature And Hold Time In A Constant Step - LongGene A200 Manual Del Usuario

1.3 Changing Temperature and Hold Time in a Constant Step

1. In the Edit Program screen, touch temperature box or hold time box of a step.
2. Enter a value in the pop-up keyboard and then touch Ok.
Note:
The allowable temperature range is from 0°C to 105°C, with 0.1°C interval.
The allowable Hold time range is from 0:00:00 to 9:99:99 hour: min: sec.
Touching ∞(Forever) in the keyboard will cause the program to hold
indefinitely after reaching this step until it stopped manually.
51