Start Cleaning - ABANTERA 135I13T20NT Manual De Usuario

5
Starting and charging
Hold down
indicator light is on.
Image of the robot and charging base
6
Connect to the mobile app (this step can be skipped)
Check the Wi-Fi connection guide, then connect the mobile app.
7

Start cleaning

After the robot is turned on, briefly press the
start cleaning (press any button to pause during use).
20 |
to turn on the robot. Charge the robot on the charging base when the power
2 cm
ATTENTION
If the machine cannot start due to a low
battery, charge the robot on the charging
base and the machine will start automatically. The
machine can only work when the battery charge is
20% or higher. As the image shows, the charging base
is positioned correctly in front of the machine. The
distance between the front of the machine and the
charging base should be about 2 cm.
button on the robot or use the mobile app to
ATTENTION
The robot cannot be used on liquids. If the
battery level is less than 20%, the machine
cannot operate. Please charge it.
The machine will return to the charging base
automatically if the battery level drops below 20%.
Clear away any cords (including the power cord of
the charging base) on the floor before using the robot
in order to avoid cuts or damages to cords or other
objects that may occur if the robot drags the cords.
U N I T E D S TAT E S
INST ALLA TION