Installing The Software; Microsoft Windows 98/98Se Or Windows Me - Yamaha AP-U70 Manual De Configuración

INSTALLING USB DRIVER AND APPLICATION SOFTWARE

Installing the software

Microsoft Windows 98/98SE or Windows Me

Installing and checking the USB driver
1
Turn on your computer and, if it's not running
already, start Windows 98/98SE or Windows Me.
2
Plug the AC power cord of this unit into the AC
outlet.
This unit can be on or in standby mode when installing the
driver.
3
Connect this unit to a USB port on the computer
using the supplied USB cable.
Windows automatically detects this unit and installs the
necessary driver software. Make operations as indicated in
the dialog box. You may be requested to insert your
Windows OS CD-ROM.
* The installation may take a longer time depending on
the system environment. After the installation dialog
box disappears, wait several minutes.
Check that the USB driver has been installed successfully
by following the procedure below.
4
Click the Windows "Start" button and select
"Settings", and then "Control Panel".
The Control Panel window appears.
5
Double-click the "System" icon.
The System Properties window appears.
6
Click the "Device Manager" tab.
The Device Manager window appears.
7
Click the "View devices by type" option button.
8
Click the "+" symbol next to "Sound, video and
game controllers," and make sure that "USB Audio
Device" appears in the list, as shown.
* The screen image is for Windows 98SE.
* When using Windows Me, "?" may be shown at the
head of "USB Copmposite Device" in green. This
means the USB driver has been installed with the
Generic ID supplied with the operating system. (This is
not an error message.)
10
E-
9
Click the "+" symbol next to "Human Interface
Devices", and make sure that "HID-compliant
consumer control device" and "USB Human
Interface Device" appear in the list, as shown.
* The screen image is for Windows 98SE.
10
Click the "+" symbol next to "Universal Serial
Bus controllers" and make sure that "USB
Composite Device" appears in the list, as
shown.
* The screen image is for Windows 98SE.
Notes
● The device list on your computer may differ to that shown
here.
● If "!" or "?" is shown at the head of the device name, check
the followings:
* The USB cable is firmly connected.
* The AC power cord of this unit is plugged into an AC
outlet.
● If the driver has not been successfully installed, disconnect
the USB cable and connect it again. Then try to install the
driver again. If installation still fails, restart Windows and try
again.